我现在在用bf707这个片子,现在可以使用ICE-1000在线调试程序了,我现在想把程序烧写到板子上的spi-flash中不知道怎么操作,请大家指点一下!谢谢!
我在网上也找了一些方法,试着操作了一下,出现下面的错误,
'Building target: BF707_GPIO.ldr'
'Invoking: CrossCore Blackfin Loader'
elfloader.exe -proc ADSP-BF707 -si-revision 0.0 -b SPI -f hex -width 16 -bcode 1 -init D:/CrossCore\ Embedded\ Studio/BF707_INIT_V01/Debug/BF707_INIT_V01.dxe -o BF707_GPIO.ldr BF707_GPIO.dxe
'Finished building target: BF707_GPIO.ldr'
' '
make --no-print-directory post-build
cldp -proc ADSP-BF707 -emu ICE-1000 -driver "C:\Program Files (x86)\Analog Devices\ADSP-BF707_EZ-Board-Rel1.0.0\BF707_EZ-Board\Blackfin\Examples\Device_programmer\bf707_w25q32bv_dpia.dxe" -cmd prog -erase affected -file "D:\CrossCore Embedded Studio\BF707_GPIO\Debug\BF707_GPIO.ldr"
Target Blackfin CS Emulator
Platform ADSP-BF707 via ICE-1000
Error: couldn't find DPIA buffer address
Processor ADSP-BF707
Error: could not allocate storage for the buffer 0xD.
Error: Error: There was a problem with one or more
Driver C:\Program Files (x86)\Analog Devices\ADSP-BF707_EZ-Board-Rel1.0.0\BF707_EZ-Board\Blackfin\Examples\Device_programmer\bf707_w25q32bv_dpia.dxe
required expressions in the driver. Please make
sure the following expressions are present and
try again:
Error: driver load failed.
「该帖子被 chengfei 在 2015-10-28 14:57:50 编辑过」