请确认以下问题:
1. 摄像头接入电视机,能否看到图像。
2.代码运行后,能否进入中断函数。
3.摄像头需接入“ AVIN1"at the bottom right"”,连接接口是否正确。
4. 拨码开关是否拨至“change switch #6 of SW3 to on ”。
5.查看图像模式根据你代码不同,设置也不同,请确认下面配置是否正确:
- Open the Image Viewer "View/Debug Windows/Image Viewer". Do following steps:
If Entire Field mode is used:
Type start address 0X1; Horizontal Pixels = 858; Vertical Pixels = 525; Pixels per bit = 8;
Stride = 2
If Active Field mode is used:
Type start address 0X1; Horizontal Pixels = 720; Vertical Pixels = 507; Pixels per bit = 8;
Stride = 2