Andy,你好。

        我现在用的BF518F的板子上没有使用SDARM,在程序量大时编译通不过,显示错误如下,

[[Error li1040] "C:\Program Files\Analog Devices\VisualDSP 5.0\Blackfin/ldf/adsp-BF518.ldf":444 Out of memory in output section 'L1_code' in processor 'p0'
Total of 0x1b090 word(s) were not mapped.
For more details, see 'linker_log.xml' in the output directory.


[Error li1040] "C:\Program Files\Analog Devices\VisualDSP 5.0\Blackfin/ldf/adsp-BF518.ldf":485 Out of memory in output section 'L1_code_sram' in processor 'p0'
Total of 0x1b090 word(s) were not mapped.
For more details, see 'linker_log.xml' in the output directory.

         请问有办法解决吗?

使用的内存超出了L1的大小，你需要给工程添加LDF文件，在工程选项中有添加LDF文件的选项，添加完成后，将使用内存选项勾上，然后选择板卡实际的内存大小即可。必要的话用section命令将所使用的内存指向SDRAM固定的BANK